Teaching Resources / Level 3 · Innovate / Unit 7
Assessment: Worksheet, oral Q&A
PPT (coming soon)
Connect a load resistor to the generator: the circuit is closed and current starts to flow in the coil.
Mission: real wind keeps changing. Use the formulas to explain why the maximum power point drifts with wind speed, then take the 30-second gust challenge: track the best resistance by hand or switch on MPPT, and compare the energy collected.
Related units: Elementary Unit 12; Junior High Unit 12; Senior High Units 7, 9, 10
Pick a load resistance and watch what happens to the blades, the current and the voltage. Power P = 3.46 V × 35 mA = 119 mW.
Pick a load resistance and watch what happens to the blades, the current and the voltage. Power P = 3.46 V × 35 mA = 119 mW.
ScanMy readingsNowModel curve (current wind)
Press “Auto scan”, or change the resistance and press “Log this reading”, to draw the upside-down U on the chart.
MPPT challenge: 30 seconds of gusts The resistance resets to 100 Ω and the wind varies between about 2 and 7 m/s. Drag “Fine-tune R” to chase the maximum power point, or tick MPPT and let the computer do it.
Tip: when the wind gets stronger the best resistance gets smaller; when the wind drops it gets larger.
Model formulas (simplified model)
Wind torque: τ_wind = τ₀(v)·(1 − ω/ω_free), with τ₀ ∝ v² and ω_free ∝ v
Generator: E = k·ω; I = E/(R + r); magnetic braking torque τ_mag = k·I (Lenz’s law)
Steady state: τ_wind = τ_mag; V = I·R; P = V·I = I²R
Think of the whole turbine as a battery: open-circuit voltage E₀ = k·ω_free = 4.49 V, equivalent internal resistance R_eq = r + k²·ω_free/τ₀ = 30 Ω. Power is highest when the load equals R_eq (maximum power transfer theorem).
Parameters: k = 0.0286 V·s/rad, coil resistance r = 6 Ω, current wind speed 5.0 m/s.
One question per stage: read it, choose an answer, then press Check answer.
Loading questions…
Related units: All units at all three levels