Teaching Resources / Level 3 · Innovate / Unit 9
Assessment: Worksheet, oral Q&A
PPT (coming soon)
Wind flowing over the blades creates lift and sets the rotor turning.
Blades | Elementary
Blades turn the force of the wind into rotation. Number, shape, area and pitch all affect power output, and elementary students test them one by one over five units.
Related units: Elementary Unit 5; Junior High Units 4 & 7; Senior High Units 5 & 9
Drag to rotate 360°, or use the arrow keys. Move the Explode slider to see inside.
Simplified model, not experimental dataThe driver gear sits on the blade side; the driven gear sits on the generator side.
Each turn of the blades spins the generator 3.00 times; torque drops to just 33%, so the blades need enough force to drive it.
Gear ratio = driver teeth ÷ driven teeth. As generator speed goes up, torque goes down by the same ratio (ignoring friction losses).
Related units: Elementary Unit 6; Junior High Unit 10; Senior High Unit 9
Connect a load resistor to the generator: the circuit is closed and current starts to flow in the coil.
Mission: real wind keeps changing. Use the formulas to explain why the maximum power point drifts with wind speed, then take the 30-second gust challenge: track the best resistance by hand or switch on MPPT, and compare the energy collected.
Related units: Elementary Unit 12; Junior High Unit 12; Senior High Units 7, 9, 10
Pick a load resistance and watch what happens to the blades, the current and the voltage. Power P = 3.46 V × 35 mA = 119 mW.
Pick a load resistance and watch what happens to the blades, the current and the voltage. Power P = 3.46 V × 35 mA = 119 mW.
ScanMy readingsNowModel curve (current wind)
Press “Auto scan”, or change the resistance and press “Log this reading”, to draw the upside-down U on the chart.
MPPT challenge: 30 seconds of gusts The resistance resets to 100 Ω and the wind varies between about 2 and 7 m/s. Drag “Fine-tune R” to chase the maximum power point, or tick MPPT and let the computer do it.
Tip: when the wind gets stronger the best resistance gets smaller; when the wind drops it gets larger.
Model formulas (simplified model)
Wind torque: τ_wind = τ₀(v)·(1 − ω/ω_free), with τ₀ ∝ v² and ω_free ∝ v
Generator: E = k·ω; I = E/(R + r); magnetic braking torque τ_mag = k·I (Lenz’s law)
Steady state: τ_wind = τ_mag; V = I·R; P = V·I = I²R
Think of the whole turbine as a battery: open-circuit voltage E₀ = k·ω_free = 4.49 V, equivalent internal resistance R_eq = r + k²·ω_free/τ₀ = 30 Ω. Power is highest when the load equals R_eq (maximum power transfer theorem).
Parameters: k = 0.0286 V·s/rad, coil resistance r = 6 Ω, current wind speed 5.0 m/s.
One question per stage: read it, choose an answer, then press Check answer.
Loading questions…
Related units: All units at all three levels