Teaching Resources / Level 3 · Innovate / Unit 13
PPT (coming soon)
Background knowledge from Chapter 2 of this unit's Teacher's Guide. Use it with the interactive lessons below in class.
This section is written for lesson preparation. It gives plain-language explanations of the physics and engineering behind two problems students often run into when pushing for peak performance: lost energy and violent vibration.
First, pay close attention to conservation of energy. In a wind power system, any unnecessary vibration, noise, structural deformation or heat affects overall performance, because all of these losses come out of the wind energy captured by the turbine. Whenever wind energy is wasted on vibration, deformation, noise or friction, overall efficiency drops.
Experience from competitions has revealed several common design mistakes worth noting.
Second, choose materials carefully when designing the system, and avoid subjecting them to bending forces as much as possible so they do not deform. This keeps the system stable and improves overall efficiency and reliability.
1. Always use bearings. Bearings are mature, widely available components that reduce friction and greatly cut the energy lost as unwanted heat, so they should be used wherever appropriate.
2. Balance every rotating part so its center of mass sits on the axis of rotation. Otherwise the off-center mass undergoes centripetal acceleration, creating unwanted forces and vibration. The energy for this vibration also comes from the wind energy the turbine captures, which lowers the system's generating efficiency.
3. Any object with mass that is fixed to and turns with the shaft should be kept as close to the bearings as possible. Otherwise leverage needlessly increases the force on the bearings, and with the bearing acting as a fulcrum, a rotating part placed too far from it can bend the shaft.
4. No rotating shaft should deform while running. Pay special attention to shaft sizes and make sure each shaft is strong enough not to bend as it turns. This keeps the shafts stable and reliable in operation and avoids unnecessary failures or efficiency losses.
5. The turbine blades must be strong enough, yet as light as possible, to avoid excessive deformation or vibration as they spin. Balancing blade strength and weight keeps the turbine stable while rotating and reduces unnecessary loads and failures.
A patient arrives: first observe the symptom. Not turning, too slow, shaking, or jumpy readings?
Goal: some patients have two problems at once. Every check takes time, so diagnose in the most efficient order, then choose the right fixes. A first-try cure also earns an efficiency bonus. 10 patients today.
Related units: Level 1 Units 13–14; Level 2 Unit 14; Level 3 Units 11–14
One question per stage: read it, choose an answer, then press Check answer.
Loading questions…
Related units: All units at all three levels