Teaching Resources / Level 2 · Investigate / Unit 9
Assessment: Oral Q&A, calculation practice, worksheet
PPT (coming soon)
Related units: Elementary Units 7–11; Junior High Units 6 & 9
Set up the blades and click “Run test”; the result is recorded in the engineering notebook. If you change two or more variables compared with the previous test, you'll see a reminder: that way you can't tell which change caused the difference.
Simplified model, not experimental dataThe default blades are installed. Click “Run test” first to get a baseline.
| # | Number of blades | Pitch angle | Blade area | Shape | Power (simulated) |
|---|
Every slice of the blade travels in a circle. The closer to the tip, the bigger the circle and the faster it moves: the speed ωr grows with the radius r.
Here the blade speed ωr = 16.8 m/s and the relative wind V_rel = 18.6 m/s. At a fixed tip speed ratio, changing the wind speed changes the sizes, not the angles.
Simplified model, not experimental dataHere the angle of attack is 17.5°, beyond about 15°: the air separates from the suction side (stall), lift drops and drag soars.
Angle of attack α along the span (root → tip)
Current: Flat blade (no twist)Compare: Twisted blade
Flat blade: angle of attack 27.5° at 20% span but 0.1° at the tip. With one angle along the whole length, not every slice can be right.
Why twist? The root moves slowly, so its relative wind is steep (large φ); the tip moves fast, so its relative wind is almost flat (small φ). A flat blade has one angle along its whole length, so some part is always too steep or too flat. A twisted blade changes θ along with φ, keeping every slice in the most efficient range.
Key: V is the natural wind, −ωr the head-on wind from the blade’s motion, V_rel the relative wind; lift is perpendicular to the relative wind and drag parallel to it (drag drawn 5× larger); dashed arrows are the turning force and thrust.
Related units: Junior High Unit 9; Senior High Unit 4
One question per stage: read it, choose an answer, then press Check answer.
Loading questions…
Related units: All units at all three levels